Search found 1136 matches

by dtoots1
Sat May 11, 2019 10:47 am
Forum: Late model JD crawler technical support
Topic: JD 450 Engine Replacement
Replies: 3
Views: 4175

Re: JD 450 Engine Replacement

while engine is out, would be good idea to check clutch, pressure plate, possible broken worn out parts, and clean clutch mechanisms and pilot bearing, any doubts replace.
by dtoots1
Wed May 08, 2019 1:13 pm
Forum: Late model JD crawler technical support
Topic: clutch plate removal
Replies: 13
Views: 9000

Re: clutch plate removal

jason37756,
please check your private messages

get to it next to your login, once you login to the site..
by dtoots1
Wed May 08, 2019 9:21 am
Forum: Late model JD crawler technical support
Topic: 450 Straight not pulling on right side under load.
Replies: 6
Views: 5443

Re: 450 Straight not pulling on right side under load.

Jason37756,
that should put you close to Huntsville area which i go thru on way down...switch over to private messages and we can jaw bit..
by dtoots1
Wed May 08, 2019 7:52 am
Forum: Late model JD crawler technical support
Topic: 450 Straight not pulling on right side under load.
Replies: 6
Views: 5443

Re: 450 Straight not pulling on right side under load.

believe Lavoy, owed of this site has the gauges available..

Jason37756...where are you located in Tennessee? I will be down near Crossville, Tn within next 2 weeks weather permitting!!
by dtoots1
Fri May 03, 2019 9:15 am
Forum: Late model JD crawler technical support
Topic: rear transmission plate removal
Replies: 6
Views: 5582

Re: rear transmission plate removal

jason,
i had same problem with oil pan on 2010 had lips all around and had to use fairly flexible putty knife and then one of wives long kitchen utensils to reach further til blamed thing got a bit loose...is cast as well and heavy booger
by dtoots1
Fri May 03, 2019 9:09 am
Forum: Late model JD crawler technical support
Topic: 350 B winch on a 350
Replies: 30
Views: 21543

Re: 350 B winch on a 350

jason,
where you at in tennessee? i will be down in crawford, tn to work on deceased sons house and property...mite stop by if close..i have jd440ic 6 way
by dtoots1
Thu Apr 25, 2019 10:19 am
Forum: Early model JD crawler technical support
Topic: Lift cylinder seals..
Replies: 5
Views: 5428

Re: Lift cylinder seals..

re..jirving machine..
tis a jd440 6 way blade
by dtoots1
Tue Apr 23, 2019 8:46 am
Forum: Early model JD crawler technical support
Topic: 440i question
Replies: 24
Views: 16341

Re: 440i question

edit your profile and let us know where you located..
someone close by, may be able to look.
agree with Jim, linkage or internal screwup somewhere!!
by dtoots1
Tue Apr 16, 2019 6:30 pm
Forum: Show & Tell
Topic: New to me 450c and a pond project.
Replies: 1
Views: 5999

Re: New to me 450c and a pond project.

first, you have to register with Lavoy at the crawler site, email direct to him with your chosen login and password for the "pic server" which is found in the last forum under the "Board Index",(after you login to the crawler site "Question and Answer"),,,read all the info in the "New Dedicated Pict...
by dtoots1
Mon Apr 15, 2019 12:51 pm
Forum: Early model JD crawler technical support
Topic: Considering purchase but need help
Replies: 13
Views: 10218

Re: Considering purchase but need help

where is it at others may well be interested ...
by dtoots1
Mon Apr 15, 2019 9:11 am
Forum: Early model JD crawler technical support
Topic: Considering purchase but need help
Replies: 13
Views: 10218

Re: Considering purchase but need help

well i have a jd440ic as well...just to give you an idea of costs....i replaced 1 side of steering....new clutch pack (steels and fibres), throw out , sleeve and new brake band if i remember correctly that was a total of $650, though i do recommend that you read all the posts in regards to the jd440...
by dtoots1
Sun Apr 14, 2019 6:38 am
Forum: Show & Tell
Topic: 26 Hr 350C
Replies: 12
Views: 21495

Re: 26 Hr 350C

tracks look tight and kinda close to end for 26 hrs????????
by dtoots1
Sun Apr 14, 2019 6:33 am
Forum: Late model JD crawler technical support
Topic: 450 lower rebuild price
Replies: 6
Views: 6913

Re: 450 lower rebuild price

Location Location!!

Helps to add your general location to your profile..find profile in login drop down box!
by dtoots1
Sun Apr 14, 2019 6:26 am
Forum: Early model JD crawler technical support
Topic: new to the page
Replies: 1
Views: 3157

Re: new to the page

Jim, welcome aboard! Since you have your login for the site....first thing you need to do is add your "location" to the profile--which is located in the drop down box where you sign in.. Members are located thru out the World on this site, including...Australia, Germany,Netherlands etc....someone ma...
by dtoots1
Fri Apr 05, 2019 1:00 pm
Forum: Early model JD crawler technical support
Topic: re..jd440ic marvel slabel carb settings
Replies: 3
Views: 4381

Re: re..jd440ic marvel slabel carb settings

i added 4 ounce sea foam motor treatment to my full tank of gas...i don't see the black smoke NOW, will see next time i run it. have not messed with jets. by the way...here it is May 7th and the dozer is still running fine tho i suspect will need to add sea foam again done used it all up...pushing h...