Search found 10806 matches
- Thu Jun 08, 2023 3:03 pm
- Forum: Late model JD crawler technical support
- Topic: 350B with rockshaft- backhoe mount?
- Replies: 6
- Views: 5634
Re: 350B with rockshaft- backhoe mount?
To add to what Bruce said, it also has to be a hoe mount, not just the regular "J" hooks that hold a set of counterweights. Hoe mounts have a lot more steel to them as far as attaching forward to withstand the torque of a hoe. Bruce, I need a set of draft and drop links if you want to sell them. Lavoy
- Thu Jun 08, 2023 3:01 pm
- Forum: Early model JD crawler technical support
- Topic: 420b timing
- Replies: 4
- Views: 5316
Re: 420b timing
Yes and no. The distributor itself, no, but if you had the oil pump out, then you could have installed it in the wrong position., which would cause the distributor to be in the wrong position.
Lavoy
Lavoy
- Thu Jun 08, 2023 7:22 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Groused Bar
- Replies: 8
- Views: 8932
Re: Groused Bar
Out for delivery today, or you may already have them.
Lavoy
Lavoy
- Mon Jun 05, 2023 8:45 am
- Forum: Early model JD crawler technical support
- Topic: tips on changing reverser fluid & filter on 1010c diesel
- Replies: 4
- Views: 5805
Re: tips on changing reverser fluid & filter on 1010c diesel
IF the fluid appears otherwise decent, I probably wouldn't flush it. IF it has not been changed since new, I would be inclined to use it for a time period and change it again.
Lavoy
Lavoy
- Sat Jun 03, 2023 8:42 pm
- Forum: Early model JD crawler technical support
- Topic: tips on changing reverser fluid & filter on 1010c diesel
- Replies: 4
- Views: 5805
Re: tips on changing reverser fluid & filter on 1010c diesel
The most significant harm you can do to these crawlers is ignore required maintenance.
Lavoy
Lavoy
- Fri Jun 02, 2023 8:37 am
- Forum: Early model JD crawler technical support
- Topic: 1010 Crawler Top Idler/Roller
- Replies: 5
- Views: 5712
Re: 1010 Crawler Top Idler/Roller
4 roller crawlers did not come with an upper idler.
Lavoy
Lavoy
- Mon May 29, 2023 7:49 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 133
- Views: 510289
Re: jd420 pics
Neither should be that tight. Polish the tube, and the inside of the carrier, that should do it. If not, I would guess the tube is damaged.
Lavoy
Lavoy
- Sat May 27, 2023 9:32 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Groused Bar
- Replies: 8
- Views: 8932
Re: Groused Bar
Just came in last night, boxing up tomorrow, will go out Tuesday.
Lavoy
Lavoy
- Thu May 25, 2023 7:02 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Groused Bar
- Replies: 8
- Views: 8932
Re: Groused Bar
My supplier closed their doors during Covid, so I don't have a source as of right now. Might be something you can find online, but it will be long sticks, so truck freight only.
Lavoy
Lavoy
- Wed May 24, 2023 5:18 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Crawler Top Idler/Roller
- Replies: 5
- Views: 5712
Re: 1010 Crawler Top Idler/Roller
Do you have a 4 roller or 5 roller crawler?
Lavoy
Lavoy
- Wed May 24, 2023 2:38 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Groused Bar
- Replies: 8
- Views: 8932
Re: Groused Bar
No, sorry, I am out.
Lavoy
Lavoy
- Mon May 22, 2023 8:59 am
- Forum: Late model JD crawler technical support
- Topic: 350C Undercarriage Overhaul
- Replies: 12
- Views: 9892
Re: 350C Undercarriage Overhaul
Find the master pin, burn the center out of each end with a torch, let it cool, and it will drive right out. I have master pins in stock, $25, how much sledgehammer work do you want to do to save $25.
Lavoy
Lavoy
- Wed May 17, 2023 9:41 am
- Forum: Early model JD crawler technical support
- Topic: Need photo of 1010c transmission drain plug location
- Replies: 18
- Views: 25215
Re: Need photo of 1010c transmission drain plug location
Bolt has strength markings on the head, hex plug will not, plus they look quite different. Bolt likely has a lock washer under it, hex plug will usually have exposed threads showing. It is not likely a hex head plug. Original is standard square pipe plug, not that it couldn't have been replaced. Lavoy
- Mon May 15, 2023 8:03 am
- Forum: Early model JD crawler technical support
- Topic: Need photo of 1010c transmission drain plug location
- Replies: 18
- Views: 25215
Re: Need photo of 1010c transmission drain plug location
Hadn't thought of the serial number change, good call.
Lavoy
Lavoy
- Sat May 13, 2023 8:14 am
- Forum: Early model JD crawler technical support
- Topic: Need photo of 1010c transmission drain plug location
- Replies: 18
- Views: 25215
Re: Need photo of 1010c transmission drain plug location
Don't remember for sure, but it is not a bolt, never will be, so don't take any more bolts. It is a 3/4" NPT pipe plug, lower side of the trans facing to the left just ahead of the LH steering clutch housing.
Look in your service manual, should be a pic there.
Lavoy
Look in your service manual, should be a pic there.
Lavoy