JDcrawlers Messageboard

Hello, I thought it looks like a magnatrac, but I don't think the dozer blade matches. So it might have been added later or an add on. If it runs it is a nice machine. It looks like a wisconsin engine, is it? Good luck, Tom.

Hey, Ill take it off your hands for the price of hauling it away. It is a very nice looking machine. Should bring a good price. Good luck. Tom.

Hey thanks for the replies. I am leaning towards a Shaver boiler. They qualify for tax credit and have been around for a while. I have heated my 2000 square foot farm house for years with a Federal wood stove so I know all about cutting and splitting LOL. I burn about 4 or 5 cords a year in it and i...

Hey Guys, I am thinking quite seriously about a wood boiler. In this area it seems that Central Boilers are the brand most people go with. Does anyone have one, im sure people do, and how do you like it. And, what brand do you have? Thanks, Tom.

Yes the disks are availiable from deere I bought a set and they were 50 a disk 2 years ago. There are 10 of them. The big problem would be if the bearings were out of the reverser then it would be a mess. I am not sure how availiable the shafts and gears are. You can kinda see a little bit if you ta...

Just a note when u have the reverser out check the disks. The tabs on the friction disks get knocked off from slipping and not clutching when using reverser. The disks are available from deere and not too bad at 50 apiece, you need 10. Well 50 is what i paid a few years ago. The forward clutch pack ...

Hello, I would call that a quagmire. lol. I dont know the 1010 so im not gonna say much, but I would start with filters and then go injector pump maybe. That is one super nice looking set of crawlers. The dozer and a loader are a very nice pair. Im sure someone will chime in to help. Tom.

Now that is funny. Looks like a good time. LOL. Thanks for sharing.
Tom

Whoever bought the diesel got a good deal. The accessory bracket in the front is worth 250 and all the brackets for the fuel filter and oil filter are there also. If it runs it is a good price. Tom.

Does anyone have a manual for the 831 loader? And if anyone does, is the breakdown shown for the valve assembly? Thanks, Tom.

Sorry guys, I think I replied to everybody. Thanks, Tom

I am parting out a 440 icd. For right now I have the tracks, fair shape, and a deluxe seat no cushions for sale. I will have other parts for sale. Private message me and make an offer. Thanks, Tom.

I would like to know if it is as simple to rebuild the clutch packs of a 440 reverser as the manual makes it sound. Does just the front clutch pack come out by itself or does the differential have to come out as well. I will take pictures of this when I get to it. Thanks, Tom.

Hello, I have my 440 in for a major teardown and rebuild and was wondering about the reverser. You can tell about the engine clutch and the steering clutches, but will a worn out clutch on the reverser be obvious? Has anyone torn one down and rebuilt on? Thanks, for any help, Tom.

Don, it goes up and down by hooking the side rails onto the raised pins of the bucket tilt. If you look close you can see where they hook on. Then the scarifier goes up and down with the tilt of the bucket. You scarify then unhook the scarifier and then use the loader to pick up the scarified dirt. ...