JDcrawlers Messageboard

Every now and then We would have an aircraft with stiff control cables for the throttle or carb heat. If the cable had a solid jacket we would remove the cable from the bellcrank it mounted to and slide a length of hose over it and clamp it tight on the housing. Then fill the open end of the added h...

I think it to adjust how quickly the 3 point lift arms lower.

If you want to be artsy-craftsy you could put a plug just below to wrinkle and electroplate to build it up. Afterwards, use a Lisle 1500 hone to bring the area back out to match without introducing a conical shape. I think a battery charger, some acid for the solution and some donor material to matc...

It would be similar to patten rights. When taking a media class in college I was taught that college students a re immune to such laws and can copy all they want for educational purposes such as class projects. I was also told that companys can legally copy a pattented item up to 3 times for with in...

Very true. I for got to comment before: I like that shirt!

That could run into a copy right issue

njoldiron wrote: ↑ Mon Oct 31, 2022 6:45 pm I Had asked this question a while back and if I remember correct someone had replied that this was not a good idea because it puts pressure on the clutches and weakens them. You could probably search the site and find more info on this question I don't und...

In case someone is interested,
https://nwga.craigslist.org/grd/d/rome- ... 10293.html
It's listed in Rome, northern Georgia, fairly close to the Alabama line

If the voltage at the starter is low you could look over the battery cables, see if there is a hot spot where the voltage drop is occurring.

I have gotten reluctant to use either on an engine I'm not sure is happy with it being used. I bought a Chinese 3 cylinder tractor that had new injectors and pump installed. I saw a video of it running after installation on the owners phone after he got it running (was rather happy with the resurrec...

I bought one of those hand operated pumps with the gage to indicate what pressure the injectors pop off at. Being a lever operated pump, the pressure changes quickly when it happens. Mine cost about $80 on ebay I think. I have used it on my two Chinese tractors. One was a three cylinder with recentl...

south of I20 on the Alabama/Georgia border. $2500

https://bham.craigslist.org/hvo/d/graha ... 57340.html

In case anyone is interested. I don't see them listed often.
https://chattanooga.craigslist.org/atq/ ... 01701.html

In case someone is interested. From the listing, it runs well but one of the new steering clutches quit working and the primary clutch can be sluggish at disengaging.
https://bham.craigslist.org/grd/d/warri ... 89655.html

On my old Ford with the Navastar 7.3l IDI the alternator provides pulses that are used to determine the RPM which is common practice in the automotive industry. There is a lead which is tied to only one winding to give a single pulse per revolution and these are used to derive engine RPM. The pulley...