JDcrawlers Messageboard

let me get this straight...
are you saying that a 2 bolt hydreco would or could be the same as a 4 bolt hydreco except for the mounting holes?

if they are i had better go get the blamed thing as is...new...and is half of rebuild cost..is only half hour away so could look at it..

ok fair enough...
now if is only seal leak....what costs involved in that and are the seals etc. available?

outa curiosity what uses the 2 hole mount hydreco if you know....
i don't even know just how these mount...pic does show 4 holes in pump, am guessing mounts something like the cam pump?

O>K> guys i am a bit ignorant as to those kinds of operations, which is why i post these questions, your answers are what i needed to understand. did find out there seems to be 2 different hydreco pumps...2 bolt mount and4 bolt mount...this is 4 bolt, what i see from pics from owner. what is it that...

well guy says he does have hoe chained up and can lift loader with his skid steer to test drive and load on trailer.... just have to decide if can get a blamed pump on the booger.... and if that price be a bit more reasonable...gonna try for 2 grand knowing blamed hydreco looking at 1000 or more.......

ok...so what wold be needed if took hoe off to operate loader? or loader off to run hoe? i.e. only need run 1 at time, disconnect supply etc..

doubt if old cessna pumps would do...

OK so what for pumps are available??? prices ??? Now couple question, according to the jd50 series...requires up to 2000psi, i think was 24gpm?...tho don't know if is jd50 yet, gotta check serial number and see what that says...what capacity tank would that require as well? also, what about using a ...

got pic of tag...shows serial number 71 988

will pursue further..let know if any help or pumps out there...

model 50 weight is 2455lbs.. tho don't know if is model 50 yet

Hey JimB doin fine..bit wet but rather warm here today..sure like that better than cold!!! Tigerhaze, Lavoy and JimB... do either of you know what for hydraulic pump this outfit would take? Its about an hour away from me so not looked at yet...and don't know if is jd50 hoe yet.....new front tires an...

am looking at a jd440 gas wheeled tractor with backhoe and front loader..is 2 cylinder also

can anyone tell me what weight i might be looking at?

thank you...it is always great to hear how things worked out!!!!

Chartersj,just wondering if you were able to get that bolt out?

also where you located?

update your profile with location...that is located in the drop down box where you login....

ahhh so! i see that be a problem... gonna take a bit of ingenuity to correct that...and no real room to work with .....sure would be nice to have an "tool" to fit over damaged nuts etc....hmmm how about welding an old nut to the head and using that...something just a size larger would give a bit of ...

believe you may be talking about the large mounting bolts for the blade arms? if i remember correctly i used extension on my box end and turned enough from the outside to break loose and then had to get underneath to get all the way out., course mine were not stripped and i wouldn't think those larg...

also, update your profile as to your location...someone may be around the corner and can visually look and help

tmond,
sounds like
1...main engine clutch may be slipping....try adjusting.
2. .. go thru steering adjustments exactly as show in your manual. and try again, sometimes adjustment may need done at least twice.

then report back as to results.