got a 1010 gasser, 5 roller.
it's got three bad rollers all on the passenger side.
got one replaced saving up for the others. (lavoy seems to be the man with the best prices, tried three others)
as i was underneath taking off the rock guards. saw that the 4 bolts that appear to fasten it to the frame were loose. bottom ones only spun wouldn't tighten up. top ones had a smaller diameter put in and a nut. other side all 4 were sheared off. dug around in the frozen mud and clay (northern mn) and to me looked like the two on top the holes are visible and can see threads. and the two on bottom deadended before they came out the other side.
some old welds on the plate with the bolts in them but don't look factory. would seem silly to weld and bolt anyways. if indeed are threaded looks like some work to get enough stuff out of the way before i can re-tap them.
just trying to get some insight from the "experienced" before i just start wrenching and cussing.
[/b]
