Anyone with a parts manual for a 420 Crawler .

Lu47Dan · Post by **Lu47Dan** » Mon Feb 25, 2008 9:11 am

Would someone know the part number for the bushings that go in the idler wheel . I am waiting for my manuals to come and would like to get the bushings . Since one side is bad do you think that I should do both side while I am rebuilding the final drives ? Also need the part number for the heavy snap ring that goes on the master pin . Thanks , Dan

chickenman · Post by **chickenman** » Mon Feb 25, 2008 2:40 pm

Idler wheel bushings--Part# M2266T
Master pin snap ring--Part# M2679T

Didn't check to see if JD still lists them. Since you are rebuilding finals, I would replace both sides to make them alike or evenly worn.

Lu47Dan · Post by **Lu47Dan** » Mon Feb 25, 2008 9:32 pm

Will call my local John Deere dealer in the morning and see . Thanks for the numbers . Dan

Lu47Dan · Post by **Lu47Dan** » Thu Feb 28, 2008 11:21 am

The bushings and the snap ring are still available through J.D.
Bushing $26.50 each
Snap ring $3.00 each
Lets see I need two bushings per side ? Dan

JDcrawlers Messageboard

Anyone with a parts manual for a 420 Crawler .

Anyone with a parts manual for a 420 Crawler .

Who is online