General help and support for your Lindeman through 2010 John Deere crawler
-
brettjones
- 420 crawler
- Posts: 39
- Joined: Fri Jul 06, 2007 9:27 am
- Location: Lamoine, Maine
Post
by brettjones » Tue Nov 04, 2008 1:24 pm
I'm still tearing my 1010 down. Aside from the track frames, I'm very upbeat about what I'm finding.
I have a small list of items I'll need to source and I'm hoping I'll have some luck here.
1. 1 right side idler bracket (#T 10024 T)
2. 1 idler bracket clamp. my parts book calls it a "Guide" (#T 16670 T)
3. right and left fenders and mounting brackets for outside blade dozer configuration.
4. a winch fairlead assembly (I'm not positive which winch model I have)
JD 1010c, outside blade, winch
-
john lewis
- 430 crawler
- Posts: 51
- Joined: Mon Aug 25, 2008 2:41 pm
Post
by john lewis » Wed Nov 05, 2008 11:15 am
did u get pic. of 1010 bottom i sent has some of those parts dont know shape but it may be worth trip at 20 cents a lb u may get what u need fairly cheap
440 ic 831 loader
-
brettjones
- 420 crawler
- Posts: 39
- Joined: Fri Jul 06, 2007 9:27 am
- Location: Lamoine, Maine
Post
by brettjones » Wed Nov 05, 2008 4:15 pm
No pictures on my end John. They might have been trapped by the spam/anti virus filter on the server. Try sending them one picture at a time.
Thanks.
JD 1010c, outside blade, winch
-
JD430C
- 1010 crawler
- Posts: 350
- Joined: Tue May 03, 2005 11:00 pm
- Location: Northfield, Vermont
-
Contact:
Post
by JD430C » Wed Nov 05, 2008 9:14 pm
hello brettjones, i sent u two pms, dont know if u got them. i have a pair of 4 roller track frames, last time i looked at them they were pretty good. pm me if u are interested.
andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD
-
brettjones
- 420 crawler
- Posts: 39
- Joined: Fri Jul 06, 2007 9:27 am
- Location: Lamoine, Maine
Post
by brettjones » Thu Nov 06, 2008 10:39 pm
Got the pics John. Thanks.
PM sent for you Andrew.
JD 1010c, outside blade, winch
Who is online
Users browsing this forum: No registered users and 36 guests