1010 dozer starter

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
spenceraucoin
420 crawler
420 crawler
Posts: 41
Joined: Fri Oct 17, 2008 6:36 am
Location: Amelia, La

1010 dozer starter

Post by spenceraucoin » Tue Apr 07, 2009 9:20 pm

:cry: need info on removel of starter ,whats needs to be removed. Spencer
Top
Pjw350
40C crawler
40C crawler
Posts: 13
Joined: Mon Oct 29, 2007 4:29 pm
Location: Chicago,IL Felch,Mi

Post by Pjw350 » Tue Apr 07, 2009 9:40 pm

My bucket was in the down position and the arms for the bucket are in the way. My solenoid snapped off internally and it was very difficult to get it off. If you could raise your arms it should come off easily.

heres a pic of my new one.

http://p1.bikepics.com/pics/2007/10/30/ ... 28-800.jpg
JD 1010 Loader
86 K20 Suburban w/ Plow
79 F150
04 Ram 4x4
84 K20 6.2 diesel w/ Plow
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Tue Apr 07, 2009 9:50 pm

i have a 2010 and it should be about the same,on mine ( diesel) you have to take the fuel filters off two nuts and the main cable and the smaller wires and it should come right out the top
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 30 guests