new member just say hi
-
- 40C crawler
- Posts: 13
- Joined: Fri Mar 19, 2010 8:16 am
new member just say hi
hello i'm new to this board , im buying a 420 with blade not sure on the yr but will should have a coupe pics tomorrow. it runs fine works ok needs some tlc the right steering clutch needs adjustment and needs the upper track idlers. but engine seems fine its been coverted to a 12 volt system not sure if ill keep that time will tell. im hoping to restore the old girl back to new sorta a father son poject with my son. love this site lots of useful info here. im a heavy duty equipment mechanic/operator by trade so shouldnt take me to long to learn the 420.my dad had an old catperpillar 30 but mom solf it as scrap when dad passed away wished she had kept it.but this 420 will do what i need
Not yet Chuck. I had a rather sudden parting of the ways with my employer last November and ended up working back in the nuclear power business again. I've been working in Kennesaw, GA and Russellville, AR for the last four months only getting home occasionally.
The 1010 project has been on the back burner but never forgotten. I was out in the shop last night looking it over and I am going to roll into town today to get some argon for my TIG welder. I've got the sprocket shields ready to go back on and the track frames are restored and reinstalled. I need to do some weld build up on the teeth of one of the sprockets next and then I should be ready to put the rebuilt track rails and the new shoes I got from Lavoy on.
I'm going to try to do up another batch of the seal tools tomorrow or Monday if anybody needs one.
Bill
The 1010 project has been on the back burner but never forgotten. I was out in the shop last night looking it over and I am going to roll into town today to get some argon for my TIG welder. I've got the sprocket shields ready to go back on and the track frames are restored and reinstalled. I need to do some weld build up on the teeth of one of the sprockets next and then I should be ready to put the rebuilt track rails and the new shoes I got from Lavoy on.
I'm going to try to do up another batch of the seal tools tomorrow or Monday if anybody needs one.
Bill
Bill Wattson
Who is online
Users browsing this forum: No registered users and 80 guests