It still needs a final drive on the left side. I probably have enough parts to build the drive except for a shaft and hub. This is a family crawler and I want to get her finished as a keeper / user.
In the mean time i have acquired a 420 with a JD90 loader, probably a parts machine, also a 440 and blade that i think i can make a runner out of. Needs ring gear and final drive work.
Most recently I picked up a complete back end (transmission and both finals) for "I am guessing a 40C) the final drive casting # is M3444T.
Now here is the question????
I am aware that most of these internal drive parts are not interchangeable but it looks like the complete drives from a 40 or 420 may bolt on to the "MC". I see I would have to spread the track carriage about 1.5" on each side.
Do you think this is a workable plan or are there other ideas???
Also I have the pressed steel pads on the MC, could I chose the flat "street" pads from the 440 and use them as an option on the MC??
Many thanks,,,,.... derf......
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)