General help and support for your Lindeman through 2010 John Deere crawler
-
Swawpy
- 440 crawler
- Posts: 165
- Joined: Wed Sep 12, 2007 4:37 pm
- Location: Texas
Post
by Swawpy » Wed Jun 29, 2011 11:58 am
Just want to confirm before I buy a winch....it is a complete set-up off of a 420, will it bolt to a 440?
Are the mounting brackets the same between 420 and 440?
Thanks!
-
Lavoy
- Site Admin
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Jun 29, 2011 7:28 pm
Winch and mount is the same, the tie rods and mounts are different.
Lavoy
-
Swawpy
- 440 crawler
- Posts: 165
- Joined: Wed Sep 12, 2007 4:37 pm
- Location: Texas
Post
by Swawpy » Fri Jul 01, 2011 4:26 pm
Thanks Lavoy- What are these tie rods and tie rod mounts?
-
Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Post
by Paul Buhler » Fri Jul 01, 2011 6:12 pm
Hi: If you look in this picture, you can see the tie rod that connects the winch to the frame on my 420. I'll get a couple of better pictures and post them tomorrow. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
-
Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Post
by Paul Buhler » Sat Jul 02, 2011 6:29 pm
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Who is online
Users browsing this forum: B Town and 47 guests