Does anyone have any leads/ideas on where to find the correct fuel shut off cable. I have yet to see one in my searches for parts. Lavoy informed me that he thought someone on here had found a resource for them sometime.
Hopefully someone can help.
440ICD Fuel Shut off cable
-
whiteclipse16
- 2010 crawler

- Posts: 626
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
440ICD Fuel Shut off cable
Ben
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
- JD440ICD2006
- 350 crawler

- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
The "correct" one of course would be an NOS or an original off of a 440 ICD. Those are hard if not impossible to find.
You can find one that will work. Most any cable encased item with a handle on the end of it. Many of the "Choke" cables will work. You can cut the case and cable (wire) to the correct length.
The only issue is that the handle on your dash will not be correct, but it will shut the engine down properly by shutting off the fuel at the rack.
The only time you want to shut a 2-53 down by restricting air is if it running away or in an emergency. It is not good for the engine as the injectors are still spraying fuel.
You can find one that will work. Most any cable encased item with a handle on the end of it. Many of the "Choke" cables will work. You can cut the case and cable (wire) to the correct length.
The only issue is that the handle on your dash will not be correct, but it will shut the engine down properly by shutting off the fuel at the rack.
The only time you want to shut a 2-53 down by restricting air is if it running away or in an emergency. It is not good for the engine as the injectors are still spraying fuel.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
-
whiteclipse16
- 2010 crawler

- Posts: 626
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
I think that's what I'm going to have to settle for, a "Choke" cable. It's really not that big of a deal, and to most people they won't know the difference. I don't know that anyone is reproducing them. The parts for the 440 diesel are all nearly impossible to find I'm finding out.
Unless I find time to make that shut off lever 2006, I won't even be needing the shut off cable. I really don't want to fix it up to where you just put the throttle way down to shut it off.
I'll keep searching.
Unless I find time to make that shut off lever 2006, I won't even be needing the shut off cable. I really don't want to fix it up to where you just put the throttle way down to shut it off.
I'll keep searching.
Ben
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
- 440 iron popper
- 1010 crawler

- Posts: 273
- Joined: Sun Sep 26, 2010 7:48 pm
- Location: Québec, Canada
Hi Ben,
Tomorrow I'll travel east and I have to stop by the old man's. It's been almost 6-7 months he talked about a 440ICD supposed to arrive. An unfinished project that the guy wants to get rid of... The old Fred will part it out for shure... but when, eh. I'll check for you.
Tomorrow I'll travel east and I have to stop by the old man's. It's been almost 6-7 months he talked about a 440ICD supposed to arrive. An unfinished project that the guy wants to get rid of... The old Fred will part it out for shure... but when, eh. I'll check for you.
440IC 1958 #443712, 602 blade, Gearmatic winch project in the back
440IC, serial tag gone, Blade with tilt
-------------------------------------------------------
440IC, serial tag gone, Blade with tilt
-------------------------------------------------------
-
whiteclipse16
- 2010 crawler

- Posts: 626
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
Who is online
Users browsing this forum: No registered users and 6 guests
