Advice on where to get parts

vtjoe · Post by **vtjoe** » Tue Jun 26, 2012 7:09 am

is there any hope that you might have a seat or should I just bite the bullet and get the other one?

Willyr · Post by **Willyr** » Tue Jun 26, 2012 11:46 am

Seats, seat frames and seat risers are all still available. Yes I did ask Lavoy before. You need to specify if you have the deluxe seat (made from bent plate) or if you have the tubular pipe seat frame. It makes a big difference.

I almost wish I had the deluxe for my 60. I think I got spoiled on that one from my crawler.

Post by **Lavoy** » Wed Jun 27, 2012 9:21 am

You should have a PM already, or shortly.
Lavoy

krob · Post by **krob** » Thu Jun 28, 2012 12:26 am

Hey guys want to thank you for all the information. I ended up replacing the points, and managed to clean out the carb without needing any rebuild stuff so i ended up not needing any new parts. However i have learned alot and now have found a good source for info. Thanks a lot.

Willyr · Post by **Willyr** » Thu Jun 28, 2012 6:04 am

LOL where are the pictures?

krob · Post by **krob** » Thu Jun 28, 2012 10:46 am

I see if i can gets some action shots this weekend. Have a few trees to clean up around the place.

Its not the prettiest of critters so it maybe better if there action shots so its slightly redeeming.

krob · Post by **krob** » Sat Jun 30, 2012 11:43 pm

Well here is at least one picture. After replacing the exhaust stack today, her hood went back on so she looks a little more appealing. She has spent the last couple of days spreading gravel.

(When i was a kid i was reading a book about i believe the six day war and there was a chunk about the use of a dozer with Natasha written on it pushing buildings over....anyway a juvenile with a spray can is dangerous thing and it kind of stuck, its been since then re sprayed a couple of times.)

JDcrawlers Messageboard

Advice on where to get parts

ford seat

Who is online