General help and support for your Lindeman through 2010 John Deere crawler
-
MY JD 40C
- MC crawler
- Posts: 7
- Joined: Wed Apr 04, 2012 5:09 pm
- Location: UPSTATE NY
Post
by MY JD 40C » Mon Jul 09, 2012 4:24 pm
Hi everyone i'm going to start working on my 40c and i was wondering is there a master pin for the tracks and how to find it.Thanks you everyone for your help Mark
-
LarryD
- 420 crawler
- Posts: 47
- Joined: Tue Apr 03, 2012 12:27 am
- Location: Western NC
Post
by LarryD » Tue Jul 10, 2012 3:44 am
Yes, there should be a master pin in the track chain. You should be able to identify it by just looking at it. It will appear a little different than the pressed in pins, as it will have some sort of a retainer to keep it from backing out of the chain on one side, and will have a head similar to a bolt or rivet on the other side.
-
whiteclipse16
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
Post
by whiteclipse16 » Tue Jul 10, 2012 6:20 am
I think if the tracks have been repinned and bushed the master pin may have been updated to one that does not use a keeper. The pin will just have a dipple in the middle of it.
Ben
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
-
pop pop
- 1010 crawler
- Posts: 490
- Joined: Thu Aug 27, 2009 12:07 am
- Location: chandler, arizona
Post
by pop pop » Tue Jul 10, 2012 12:36 pm
try the easy way first, just look for the one pin with hammer marks
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime
-
MY JD 40C
- MC crawler
- Posts: 7
- Joined: Wed Apr 04, 2012 5:09 pm
- Location: UPSTATE NY
Post
by MY JD 40C » Tue Jul 10, 2012 4:00 pm
pop pop wrote:try the easy way first, just look for the one pin with hammer marks
Thanks guy's for your help i'll be checking it out soon mark.
Who is online
Users browsing this forum: No registered users and 90 guests
