Glow plugs.
-
Beauman Putter
- MC crawler
- Posts: 5
- Joined: Fri Aug 03, 2012 3:31 pm
Glow plugs.
Where are the glowplugs located on the 2-53 Detroit Diesel?
-
JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
There are no glow plugs on the GM 2-53. The only heat source is compression, unless you choose to add a block heater.
There are two different kits that can be used. The "S" kit is 17-1 compression and is what JD speced for this crawler.
I changed mine to the "N" kit which is 21-1 compression. It does not increase HP very much, maybe torque some. But it sure helps it start great and burn cleaner with lower fuel usage.
There are two different kits that can be used. The "S" kit is 17-1 compression and is what JD speced for this crawler.
I changed mine to the "N" kit which is 21-1 compression. It does not increase HP very much, maybe torque some. But it sure helps it start great and burn cleaner with lower fuel usage.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
Who is online
Users browsing this forum: No registered users and 19 guests