undercarriage question

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
57jd420
430 crawler
430 crawler
Posts: 86
Joined: Thu Sep 20, 2012 8:18 pm
Location: Vinco Pa

undercarriage question

Post by 57jd420 » Sat Sep 22, 2012 8:05 pm

Okay here is the first question of this build. Does anybody have some pics of how the blade frame attaches to the rear axle? My crawler has just one u bolt on each side and they are pretty loose. Any help would be great.

Also does anyone know of where I could find a service manual in pdf form?
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11117
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Sun Sep 23, 2012 10:42 am

Depends on which blade you have.
Service manual should be available in PDF from Deere as far as I know.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
57jd420
430 crawler
430 crawler
Posts: 86
Joined: Thu Sep 20, 2012 8:18 pm
Location: Vinco Pa

Post by 57jd420 » Sun Sep 23, 2012 10:43 am

it has the model 61 blade.... sorry I guess I forgot to include that.
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11117
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Sun Sep 23, 2012 10:51 am

Okay, blade clamps to the rear crossbar with a "u-bolt" and a piece of flat strap.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
57jd420
430 crawler
430 crawler
Posts: 86
Joined: Thu Sep 20, 2012 8:18 pm
Location: Vinco Pa

Post by 57jd420 » Sun Sep 23, 2012 3:08 pm

okay thank you. I will just have to tighten those ones down then.
Home of the free because of the BRAVE!!!

1957 420 5 roller 5 speed
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 19 guests