General help and support for your Lindeman through 2010 John Deere crawler
-
rszkwcz
- 40C crawler
![40C crawler 40C crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 12
- Joined: Tue Aug 28, 2012 2:04 pm
- Location: Mexico New York
Post
by rszkwcz » Tue Nov 13, 2012 6:31 am
I've been looking everywhere and im coming up with a big goose egg. I'm looking for a list of attachments that
could be used on the back. I'm also wondering if a backhoe would work if so what model number? Thanks everyone in advance for your time and effort
Ken
![Smile :)](./images/smilies/icon_smile.gif)
-
gregjo1948
- 350 crawler
![350 crawler 350 crawler](./images/ranks/wrench/spanner_rank_5.gif)
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Post
by gregjo1948 » Tue Nov 13, 2012 6:42 am
I think they had a belt pulley.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
rszkwcz
- 40C crawler
![40C crawler 40C crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 12
- Joined: Tue Aug 28, 2012 2:04 pm
- Location: Mexico New York
Post
by rszkwcz » Tue Nov 13, 2012 7:41 am
i have a belt pully and a pto shaft
-
Howard Yoder
- 1010 crawler
![1010 crawler 1010 crawler](./images/ranks/wrench/spanner_rank_3.gif)
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Post
by Howard Yoder » Tue Nov 13, 2012 8:04 pm
There are some pictures in show and tell towards the bottom of the page.
Also there is a book John Deere model mc TRACK-TYPE TRACTOR That shows 15 different attachments for the rear plus the blade for the front that turns into a scraper for the back. a really neat book.
-
dnkcozmo
- 40C crawler
![40C crawler 40C crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 22
- Joined: Sat Jun 30, 2012 5:32 pm
Post
by dnkcozmo » Wed Nov 14, 2012 9:23 pm
do you know were you can get this book and is that the title of the book? i would love to get my hands on a copy of that book
-
Lavoy
- Site Admin
![Site Admin Site Admin](./images/ranks/wrench/spanner_rank_5_admin.gif)
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Nov 15, 2012 8:05 am
The book Howard is referring to is factory John Deere literature showing the MC1000 tool carrier and the various attachments that fit it. Watch Ebay, or check with literature sellers if you go to any old tractor shows.
I may have an extra, I will dig through my literature and see.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 89 guests