Merry Christmas
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Merry Christmas
Went out today and needed to fire up the dozer to bring in some more firewood. Wind is blowing and snow is accumulating. Fuel on -switch on, two cranks and off she goes. Ah...a merry and warm Christmas.
Happy holidays to everyone on the board, and may your toys all start when you want them to. Paul
Happy holidays to everyone on the board, and may your toys all start when you want them to. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
-
- 430 crawler
- Posts: 62
- Joined: Sat Nov 10, 2012 6:14 pm
- Location: Western MA
Xmas cheer
Thanks to Lavoy for all he does for this forum and happy holidays to all.
1957 420C four roll since 1982
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
MERRY X_MAS
Hey Paul-- Being from Killington; Hows that 420 handle on ski slopes at the resort? Happy holidays to you and Lavoy and everyone that shares this site. Greg (gregjo1948)
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
- mapaduke@yahoo.com
- 1010 crawler
- Posts: 420
- Joined: Sun Sep 13, 2009 6:27 pm
- Location: Rochester N.H.
-
- 2010 crawler
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Visual representations
Yes, best wishes and a merry Christmas to everyone.
Now, lets see some pictures of these 2 cylinders in action.
My 440 re-builder went in the shop yesterday to thaw out, hopefully I will be able to have some pictures of it pushing some snow before the new year. I'm starting on it on the 27th. Otherwise going to be difficult to get a 2 cylinder running as its about -25 degree celcius up here in the north.
Now, lets see some pictures of these 2 cylinders in action.
My 440 re-builder went in the shop yesterday to thaw out, hopefully I will be able to have some pictures of it pushing some snow before the new year. I'm starting on it on the 27th. Otherwise going to be difficult to get a 2 cylinder running as its about -25 degree celcius up here in the north.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
-
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
The only thing I had stroking after getting up at 3:00 a.m. was the cummins in the bus to get down town on time to catch my suttle to get back to my truck and head home to have a great time with my wfie, children, grandchildren, and my mom and some good eats and when they left I immeadily sawed logs (slept).
I want to wish every one a Merry Christmas and with Lavoy's help a Happy New Year.
p.s. Like the story in the Green Magizeen keep them 2 clyinders tuned up you never know when santa may need some help.
I want to wish every one a Merry Christmas and with Lavoy's help a Happy New Year.
p.s. Like the story in the Green Magizeen keep them 2 clyinders tuned up you never know when santa may need some help.
-
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
Merry Christmas to everyone.
Thanks to Lavoy and this board I got to hear my Detroit per yesterday.
I got all the new hoses on for the blade, just need to get the pump mounted up and the blade on, oh yea and get some snow. Suppose to be some coming in tonight
Thanks to Lavoy and this board I got to hear my Detroit per yesterday.
I got all the new hoses on for the blade, just need to get the pump mounted up and the blade on, oh yea and get some snow. Suppose to be some coming in tonight
Ben
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
- 440 iron popper
- 1010 crawler
- Posts: 273
- Joined: Sun Sep 26, 2010 7:48 pm
- Location: Québec, Canada
Happy Holdidays to all! Mines will start tomorrow when I get out of the mine. I heard Santa's rig got stuck in a snowbank around here... The reindeers were not able to pull it out. Guess what happened? A guy in the neighbourhood with a 440 equipped with a gearmatic winch pulled the rig out... Apparently the guy received his present right away and there was a remains of a shipping sticker on the box where we could read North Dakota or something... Strange... Maybe Santa Claus opened a branch over there...
440IC 1958 #443712, 602 blade, Gearmatic winch project in the back
440IC, serial tag gone, Blade with tilt
-------------------------------------------------------
440IC, serial tag gone, Blade with tilt
-------------------------------------------------------
Who is online
Users browsing this forum: No registered users and 83 guests