freshening up running gear.
so far I have replaced all nuts and bolts on rollers. w/grade 8 & nylocks.
crossbeam to frame etc.
on the left roller frame I have split the tracks , heated and removed the crossbeam cap bolts. 8 out, none broke... yeah
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Lavoy, the bolts are 3 1/4 long, w/flat washers only. I am thinking about going with grade 8, 3 1/2" & adding lock washers w/ the flats.
my ? is when I torque them to the spec. ft. lb. 310-330 should I use blue locktite or anti seize ?
![Confused :?](./images/smilies/icon_confused.gif)
also the outside roller frame, holt blade arm, hangars are getting new 2" boss' .
tin is getting a new coat of industrial yellow paint, she is coming along nicely
![Very Happy :D](./images/smilies/icon_biggrin.gif)
as always, thank you in advance for sharing your vast knowledge, it is greatly appreciated
![Very Happy :D](./images/smilies/icon_biggrin.gif)