I was wondering how much trouble it is to adjust my tracks up on my 420c 5 roller. From the looks of it I don't think it has been moved in a long time. I noticed that someone had a track adjuster on e-bay for a 430c or 420c and the decription said that it was a hydraulic track adjuster. I did not think that they have one. I know that there are two long bolts on each side that go through the springs. Any tips?
Thanks
Shawn
430W, 420C 5 roller, H, MT, L
420C Track adjustment
- steamfitter99
- 430 crawler
- Posts: 72
- Joined: Thu Nov 10, 2005 10:30 pm
- Location: Central Illinois
Adjuster
Hello, if it were me and it looks like the adjusters have not been touched in a long time, then I would take them off and rebuild them. It takes some 1" all thread and some 1" inch nuts. About 6 feet of all thread and 8 nuts and assoc hardware. I rebuilt my 420 about 8 years ago and do not regret it. Also, it would be a good time to check you front idler bushings. Just my two cents worth. Tom.
P.S. I also saw the hydraulic adjuster and am puzzled by it.
P.S. I also saw the hydraulic adjuster and am puzzled by it.
Who is online
Users browsing this forum: Google [Bot] and 21 guests