General help and support for your Lindeman through 2010 John Deere crawler
-
Runge
- MC crawler
- Posts: 2
- Joined: Fri Oct 28, 2005 7:21 pm
- Location: Madras Ore.
Post
by Runge » Mon Nov 16, 2015 4:32 pm
Will the trans gear selector top from a 40 MT fit a 40c transmission
Thanks
-
original possum
- 1010 crawler
- Posts: 258
- Joined: Wed Sep 11, 2013 3:34 pm
- Location: Shiner, texas
Post
by original possum » Mon Nov 16, 2015 8:22 pm
Yes, but the stick will interfere with the steering clutches. Better off with one from a 420 that has the stick "caged". Still have to bend it.
Early 40C w/Yakima toolbar and homebuilt ripper: 350 w/6-way
-
Lavoy
- Site Admin
- Posts: 10955
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Nov 17, 2015 10:05 am
No such thing as a 40 MT, so I assume you mean MT? Should fit, but I won't swear to it. MT uses a straight shifter, 40 is angled.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
RustAndDust
- MC crawler
- Posts: 9
- Joined: Sat Apr 25, 2015 2:39 pm
- Location: NC
Post
by RustAndDust » Thu Nov 19, 2015 5:43 pm
Actually,i just tried something similar to this.I have a 40 wheel tractor with frozen shift forks.Looking for an easy way out,i tried the shift tower from an M.Two shift forks are identical,but the third is a totally different size.The part numbers involved are M46T and M1788T.
Who is online
Users browsing this forum: No registered users and 68 guests
