jd 1010 industrial no power on left track
jd 1010 industrial no power on left track
I have operators manual and have adjusted steering brakes and adjusted throw out bearing so it just touches clutch fingers. right side works fine but left I have nothing no brake or motion. I can see throw out bearing moving fingers. I was wondering if clutch is slipping
jd no left track power
are the composite plates hard to come by if i need them for the steering clutch
1000 series crawler tractor service manual
hello again, I got my crawler at an auction came with operators manual and service manual. oil or fuel got on section 150 final drives steering,and brakes. I was wondering if I could purchase just sections of the manual and if local dealer has them.
thank you brian in ohio
thank you brian in ohio
- Jimmy in NC
- 440 crawler
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
Brian-
I don't think you can purchase just sections. The whole manual is well worth it though. I purchased both the parts and service manual for our 420 and WOW... lots and lots of good info. The parts manual is just as helpful as the service manual.
I have information on where to get reproductions but I don't have it handy. I will post in the AM but I just got in from a 13 hr marathon of putting the final on, mounting the under carriage, blade lift, fender, and track solo. I'm a lil beat.
Jimmy
I don't think you can purchase just sections. The whole manual is well worth it though. I purchased both the parts and service manual for our 420 and WOW... lots and lots of good info. The parts manual is just as helpful as the service manual.
I have information on where to get reproductions but I don't have it handy. I will post in the AM but I just got in from a 13 hr marathon of putting the final on, mounting the under carriage, blade lift, fender, and track solo. I'm a lil beat.
Jimmy
Save your money on repro manuals. The one I got was like a Haynes/Chilton--Abreviated and tried to cover every model made in 1/5 the pages of a real manual. They advertise them as model specific but they aren't and don't have all the sections.
It's worth the extra to get the "real manual".
It's worth the extra to get the "real manual".
JD420C, Ford 3910, IH 2606, Kenbota G32XKS
- Jimmy in NC
- 440 crawler
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
When I say reproduction manuals I'm talking the original manuals just not from Mother Deere. I got mine from Ed Tucker and other than coming in a folder as opposed to being bound.. they are AWSOME. I too was skeptical b/c they are copies of original. Rest assured they are first class manuals... soo nice I won't take them to the shop but Photo copy the sections I need.. then take the photo copies to the shop.
Ed's number is 812-537-4622.
Jimmy in NC
Ed's number is 812-537-4622.
Jimmy in NC
Who is online
Users browsing this forum: No registered users and 52 guests