I've started working on my 440IC again. Just picked up 10 new aftermarket 350 rollers for it yesterday. The mounting holes are larger so I looked at the parts for a 350 here:
https://partscatalog.deere.com/jdrc/sid ... gId/241898
It looks like they have a spacer (#36). Problem is they want a ridiculous amount for them, around $13 each. I may be able to find some steel tubing to make them or should I just drill and tap all of the roller holes for 9/16-18 bolts? Curious what others have done in this situation.
Here is a comparison of one of the better old ones vs new:
https://photos.app.goo.gl/fY4QETC7QTsawaPdA
Guess I should talk to Lavoy about getting permission to add photos...
Aftermarket 350 rollers for 440
Aftermarket 350 rollers for 440
1937 B
1959 440CI
1966 110
1973 140 H3
1959 440CI
1966 110
1973 140 H3
Re: Aftermarket 350 rollers for 440
You don't need them, they work fine without them.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 75 guests