440 crawler

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Hunther247
MC crawler
MC crawler
Posts: 2
Joined: Mon Jun 01, 2015 1:43 pm

440 crawler

Post by Hunther247 » Sat Jun 06, 2015 8:37 pm

Was wondering if anyone knew if 450 tracks and sprockets would fit a 440. I'm looking for tracks and sprockets for mine and found a set of nice ones off a 450 dirt cheap
Top
User avatar
notmeu
1010 crawler
1010 crawler
Posts: 373
Joined: Wed Dec 28, 2011 2:23 pm
Location: Western PA

Re: 440 crawler

Post by notmeu » Sat Jun 06, 2015 9:02 pm

No, they will not fit!
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.
Top
User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2898
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Sun Jun 07, 2015 4:33 am

Hi,

While the model numbers seem close, the sizes of the two machines are not. The 350 is closer to the 440 in size, just a bit larger. You can use 350 chains, but have to cut the teeth off the 440 sprockets and weld on a 350 rim sprocket as the pitch is different.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Top
Hunther247
MC crawler
MC crawler
Posts: 2
Joined: Mon Jun 01, 2015 1:43 pm

Post by Hunther247 » Sun Jun 07, 2015 6:31 am

Okay thank you very much for the help guys
Top
Dave T
420 crawler
420 crawler
Posts: 44
Joined: Sun Apr 12, 2009 5:58 am
Location: Brazil, IN

440 tracks

Post by Dave T » Sun Jun 07, 2015 5:15 pm

Your lucky day, I have a set of 350 tracks [chains and loader pads]. They are in very good shape. And 10 bottom rollers, 5 JD's and 5 berco in good shape. I took these track off of a 420 loader intending to put them on a 440 dozer that I had, sold my dozer and tried to talk the buyer into taking the tracks but he didn't want them. Anyway I'll sell them cheap. I'm located in west central IN. Let me know if you are interested. I need them gone.
dthomson01@frontier.com
Top
User avatar
notmeu
1010 crawler
1010 crawler
Posts: 373
Joined: Wed Dec 28, 2011 2:23 pm
Location: Western PA

Re: 440 tracks

Post by notmeu » Wed Jun 10, 2015 3:06 pm

Dave T wrote:Your lucky day, I have a set of 350 tracks [chains and loader pads]. They are in very good shape. And 10 bottom rollers, 5 JD's and 5 berco in good shape. I took these track off of a 420 loader intending to put them on a 440 dozer that I had, sold my dozer and tried to talk the buyer into taking the tracks but he didn't want them. Anyway I'll sell them cheap. I'm located in west central IN. Let me know if you are interested. I need them gone.
dthomson01@frontier.com
Thanks Dave, considered them sold!
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.
Top
User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 443
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

Post by DukeofDeere » Thu Jun 11, 2015 9:58 am

How bad are your 440 chains?
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 42 guests