Track adj

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Howard Yoder
1010 crawler
1010 crawler
Posts: 353
Joined: Mon Apr 04, 2005 6:53 pm
Location: Columbus Ohio

Track adj

Post by Howard Yoder » Fri Jul 31, 2015 5:25 pm

What size wrench to adjust the tracks on 420 1 1/2 seems to big 1 3/8 to small I had one n lost it want to buy one tomorrow but want to get the right size is it a 1 7/16

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10407
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Fri Jul 31, 2015 8:46 pm

Should be 1 1/2".
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Lu47Dan
1010 crawler
1010 crawler
Posts: 401
Joined: Mon Feb 11, 2008 3:17 pm
Location: NWPa

Post by Lu47Dan » Fri Jul 31, 2015 8:58 pm

Yep should be 1-1/2" But if the nut is badly rusted it could be smaller.
I made a set of nuts for a local guy who needed them to finish his 420 resto... He got a hell of a bargain on a lightly used crawler.
The bolt is 1" - 8TPI so the smallest the standard nut could be would be 1-1/2"
Dan,
1956 420C with GSC blade
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!

pcsaw
420 crawler
420 crawler
Posts: 25
Joined: Wed Jul 01, 2009 6:25 pm

Post by pcsaw » Sat Aug 01, 2015 5:22 am

probably have to break down and get a better qaulity wrench or use the crowfoot one I bought that has never been used if I can find it Thanks for the response

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests