Track adj
-
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Track adj
What size wrench to adjust the tracks on 420 1 1/2 seems to big 1 3/8 to small I had one n lost it want to buy one tomorrow but want to get the right size is it a 1 7/16
Should be 1 1/2".
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Yep should be 1-1/2" But if the nut is badly rusted it could be smaller.
I made a set of nuts for a local guy who needed them to finish his 420 resto... He got a hell of a bargain on a lightly used crawler.
The bolt is 1" - 8TPI so the smallest the standard nut could be would be 1-1/2"
Dan,
I made a set of nuts for a local guy who needed them to finish his 420 resto... He got a hell of a bargain on a lightly used crawler.
The bolt is 1" - 8TPI so the smallest the standard nut could be would be 1-1/2"
Dan,
1956 420C with GSC blade
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Who is online
Users browsing this forum: No registered users and 75 guests