Hi everyone
I'm planning to build up the links on my chains, the pins are ok so it's worth doing.
Can anyone tell me the dimensions of the height of new links?
I can't find any info but I can recall a height of 81mm or 3.18" that I found a few years ago
Thanks
2010 track chains
- AussieJD2010
- 40C crawler
- Posts: 14
- Joined: Mon Apr 29, 2013 9:17 pm
- Location: Kyogle NSW. Aust
2010 track chains
JD2010C Crawler Loader
Unfortunately the table with that information was on the "Crawler Heaven" website so when the owner/operator of that site died, so did the information. However if a late 2010 crawler the track links are the same height as for a 350 (same track links). We probably have the actual height specifications buried somewhere on this site but not sure where.
EDIT: I dug into an early post I had put up and according to it the value for the 1010/early 2010 rail height was 3 inches when new, measured from top of the track link to bottom face of the pad when mounted.
EDIT: I dug into an early post I had put up and according to it the value for the 1010/early 2010 rail height was 3 inches when new, measured from top of the track link to bottom face of the pad when mounted.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Who is online
Users browsing this forum: No registered users and 165 guests