General help and support for your Lindeman through 2010 John Deere crawler
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Fri Nov 20, 2015 9:39 pm
POST 31000...PRE 42000
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sat Nov 21, 2015 10:01 am
Yes I mean the cover on the inside of the axle, see how thick it is.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
Drew B
- 40C crawler
- Posts: 15
- Joined: Fri Nov 13, 2015 11:39 pm
- Location: Boulder, CO
Post
by Drew B » Sat Nov 21, 2015 10:16 am
I measured it while I was up there yesterday. 2-1/8" deep.
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sun Nov 22, 2015 2:06 pm
Ok, that is later final drive then.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 138 guests
