40 C Steering clutch, again, yet, still,,

Wheat47 · Post by **Wheat47** » Tue Apr 12, 2016 12:21 pm

Lavoy....I'm beginning to wonder if I don't have a pressure plate problem.
one set of springs in the plate is broken.
Are they replaceable?
If not, do you have a pressure plate available, and if so, how much.
Thank you
Jon K

Post by **Lavoy** » Tue Apr 12, 2016 12:48 pm

Springs are not available as a service part. I have one pressure plate on hand.
Lavoy

Wheat47 · Post by **Wheat47** » Mon May 02, 2016 9:59 pm

Hi, Lavoy
I finally got around to putting my 40C back together this afternoon. It really wasn't a bad job at all. Everything seems to be working OK. The hardest part was getting the track back together to get the pin in. Just took a come-a-long and a couple pry bars. Ran it around the yard an everything seems to work. Have to adjust the foot brake and put the fender back on and it should be good to go.
Thanks for all your help and the parts and gauge and for all the posts and tips I got here!!!
Jon K

Post by **Lavoy** » Tue May 03, 2016 8:15 am

No problem.
Lavoy

JDcrawlers Messageboard

40 C Steering clutch, again, yet, still,,

40 C Steering clutch, again, yet, still,,

40C

Who is online