Need a front idler bracket guide for a 1010

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
BearRocks
MC crawler
MC crawler
Posts: 7
Joined: Tue Feb 10, 2015 5:10 am
Location: Pa

Need a front idler bracket guide for a 1010

Post by BearRocks » Thu Aug 04, 2016 11:52 am

Just noticed that I'm missing the lower half of the inside front idler bracket guide on my 1010. It must not have been on there when I bought it. I've been running it for several months with no problems but don't think I should run it until I get it replaced. Here's some pics to show what I'm missing in case I'm not calling it by it's correct name.

This shows the missing part.
Image

This shows the track on the other side of the dozer with the part attached.
Image

And here's a pic of the outside bracket.
Image

Can anyone tell me where I could find one of these???
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10951
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Aug 05, 2016 8:01 am

I should have one, I can do some digging. Shoot me an e-mail at postmaster@jdcrawlers.com and I can get back to you.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
Gil
1010 crawler
1010 crawler
Posts: 362
Joined: Fri Dec 14, 2007 3:19 pm
Location: Pennsylvania

Post by Gil » Fri Aug 05, 2016 8:21 pm

I am jealous of anyone with that much adjustment space left on their track frame.
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs
Top
User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Sat Aug 06, 2016 3:52 am

Gil
Don't get jealous. Just pretend that the tracks are extremely slack.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sat Aug 06, 2016 11:55 am

Looks like the axle is turning in the yoke brackets you need to address that ASAP if it is
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 119 guests