grease pressure
grease pressure
Hi everyone, been awhile since I logged on, been busy with preparing the lower pasture for a hopyard, anyway, ? what is considered low pressure to grease the rollers on my 420-C I don't see any numbers in my service manual?
1500-1800 psi ...... standard guns are 5000-10000...
here is the type gun you need
https://www.amazon.com/Alemite-4015-A4- ... B009K50ZOM
ALSO good reading here
http://www.jdcrawlers.com/messageboard/ ... re+gun+oil
here is the type gun you need
https://www.amazon.com/Alemite-4015-A4- ... B009K50ZOM
ALSO good reading here
http://www.jdcrawlers.com/messageboard/ ... re+gun+oil
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
Well, it is in the FAQ forum, along with all the other topics which come up all the time. Such as serial numbers, production years and figures and manuals.
Every time any of us think that a topic comes up a lot, someone puts up a new FAQ topic. The problem is, sometimes folks forget all about the FAQ forum. And, that is understandable if one is becoming unsure of something right in the middle of twisting wrenches. It then becomes a hot topic and so off to the support forum!
Stan
Well, it is in the FAQ forum, along with all the other topics which come up all the time. Such as serial numbers, production years and figures and manuals.
Every time any of us think that a topic comes up a lot, someone puts up a new FAQ topic. The problem is, sometimes folks forget all about the FAQ forum. And, that is understandable if one is becoming unsure of something right in the middle of twisting wrenches. It then becomes a hot topic and so off to the support forum!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 96 guests