grease pressure

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
shugy368
430 crawler
430 crawler
Posts: 57
Joined: Tue May 17, 2016 12:40 pm
Location: Monterey Bay Ca.

grease pressure

Post by shugy368 » Sun Aug 21, 2016 10:09 am

Hi everyone, been awhile since I logged on, been busy with preparing the lower pasture for a hopyard, anyway, ? what is considered low pressure to grease the rollers on my 420-C I don't see any numbers in my service manual?
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sun Aug 21, 2016 10:56 am

1500-1800 psi ...... standard guns are 5000-10000...

here is the type gun you need
https://www.amazon.com/Alemite-4015-A4- ... B009K50ZOM

ALSO good reading here

http://www.jdcrawlers.com/messageboard/ ... re+gun+oil
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Fri Aug 26, 2016 6:02 am

Lavoy should sticky this. Seems like it's asked once a month.
Ben

Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Top
User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2898
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Fri Aug 26, 2016 7:18 am

Hi,

Well, it is in the FAQ forum, along with all the other topics which come up all the time. Such as serial numbers, production years and figures and manuals.

Every time any of us think that a topic comes up a lot, someone puts up a new FAQ topic. The problem is, sometimes folks forget all about the FAQ forum. And, that is understandable if one is becoming unsure of something right in the middle of twisting wrenches. It then becomes a hot topic and so off to the support forum! ;)

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 156 guests