Tachometer/hour meter for a 2010

dean r · Post by **dean r** » Wed Sep 27, 2006 10:19 am

My 2010C hour meter is missing and I'm looking for a suitable replacement any suggestions?

Thanks!

Post by **Lavoy** » Wed Sep 27, 2006 10:37 am

They might be available from Deere yet. It will most likely look different, and will not be accurate for ground speed as it will likely be a wheel tractor tach. It would be okay for hours and RPM though.
I did order a new Stewart Warner tach this week just to see what it looks like and to see if it will bolt in and hook up to the factory tach cable.
Lavoy

dean r · Post by **dean r** » Wed Sep 27, 2006 10:44 am

Lavoy Thanks for the reply!

I'll check it out, also you might check out ebay auction 300032509202 2010c he's going to scrap it if no one buys it.

Tigerhaze · Post by **Tigerhaze** » Wed Sep 27, 2006 11:22 am

That Ebay machine would be worth it for parts....too far to ship for me though.

lastchancegarage · Post by **lastchancegarage** » Fri Sep 29, 2006 9:03 am

How much would that 2010 weigh w/loader?

Tigerhaze · Post by **Tigerhaze** » Sat Sep 30, 2006 7:39 am

My 2010 loader operator's manual has the following (crawler with loader bucket and counterweights):

Gas: 13,244 lbs
Diesel: 13,349 lbs

Rear attachments (if any) will add to this total as they are heavier than the counterweights.

JDcrawlers Messageboard

Tachometer/hour meter for a 2010

Tachometer/hour meter for a 2010

Thanks!

Who is online