swap 2010-1010

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

swap 2010-1010

Post by gregjo1948 » Sun Dec 04, 2016 7:10 am

Will a 2010 engine interchange with a 1010? Thanks, gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Sun Dec 04, 2016 7:22 am

I think you can theoretically put a 2010 gas in place of a 1010 diesel. You have to play some games with the flywheel to make the 1010 flex plate work.

whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Sun Dec 04, 2016 7:25 am

Lavoy knows more but will advise against it due to power increase.

User avatar
JD430C
1010 crawler
1010 crawler
Posts: 350
Joined: Tue May 03, 2005 11:00 pm
Location: Northfield, Vermont
Contact:

Post by JD430C » Sun Dec 04, 2016 1:03 pm

Yes they will interchange. I have done it. Flywheel from a 1010 will bolt to a 2010. You will have to swap the water pumps around as the plate that they bolt to is different.

Andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Mon Dec 05, 2016 4:03 am

Thank you guys for your replies. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Mon Dec 05, 2016 1:24 pm

Are you in need of an engine grego?

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Mon Dec 05, 2016 5:23 pm

whiteclipse16 wrote:Are you in need of an engine grego?

No. I saw a 2010 and 1010 for sale that the swap would make one good machine from the two.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

tlock0331
40C crawler
40C crawler
Posts: 13
Joined: Mon Oct 08, 2012 6:20 pm

Post by tlock0331 » Sun Dec 18, 2016 7:54 am

whiteclipse16,

I could maybe use one....i have also been thinking about trying to drop a 2/3 - 53 series detroit or maybe building an adapter plate and putting in a 4bt...but if you have a diesel motor. i think my email is open

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Sun Dec 18, 2016 8:02 am

tlock0331 wrote:whiteclipse16,

I could maybe use one....i have also been thinking about trying to drop a 2/3 - 53 series detroit or maybe building an adapter plate and putting in a 4bt...but if you have a diesel motor. i think my email is open
I think a 353 might be a bit too much power for the machine.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

Post Reply

Who is online

Users browsing this forum: No registered users and 52 guests