rollers

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

rollers

Post by gregjo1948 » Sat Jan 07, 2017 7:13 am

Will rollers interchange between a 1010 and 440? Thanks, gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Sat Jan 07, 2017 3:11 pm

Thanks Ralph!!!
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sat Jan 07, 2017 4:45 pm

IF 2010 rollers are the same as 440 ( And I thought there were) It would be ALL 2010 as pre 42000 and after are the same. Also 350s are the same BUT you need to bush the bolt holes
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

User avatar
Wilbur
420 crawler
420 crawler
Posts: 48
Joined: Sun Nov 06, 2016 5:09 pm
Location: Penn Run, Pennsylvania

Post by Wilbur » Sat Jan 07, 2017 9:09 pm

While the subject is interchanging parts from 1010 to 440, will the tracks from a 1010 fit the 440?
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]

User avatar
notmeu
1010 crawler
1010 crawler
Posts: 373
Joined: Wed Dec 28, 2011 2:23 pm
Location: Western PA

Post by notmeu » Sun Jan 08, 2017 11:09 am

yes, the tracks will interchange from a 1010 to a 440. The only difference with the rollers is the bolt sizes, you may want to use some small shim material to make up the difference in the casting hole size.
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sun Jan 08, 2017 11:44 am

The PRE 42000,, 2010 chains will also fit
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Mon Jan 09, 2017 12:13 pm

1010 pads are 4 bolt, 440 are 2 bolt if you care.
Ben

Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Mon Jan 09, 2017 8:22 pm

My original 440ICD at least has four bolt pads, not sure on the other two.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
Wilbur
420 crawler
420 crawler
Posts: 48
Joined: Sun Nov 06, 2016 5:09 pm
Location: Penn Run, Pennsylvania

Post by Wilbur » Thu Jan 12, 2017 11:17 am

Thanks for the replies. I tried in vain days ago to reply to posts, just would not do it.
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Thu Jan 12, 2017 1:13 pm

Hi,

Oh, it does *something* with them. Runs up the Post Count with invisible messages! :P

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

Post Reply

Who is online

Users browsing this forum: No registered users and 52 guests