Hi
I find that the 3pt linkage on my 440 JD Lanz with 3 cylinder diesel Perkins, has far more downward force ie can lift the back of the crawler if not careful. Than lifting capacity struggles with 350kg upwards.
I assume the Lanz 440 has similar performance to the USA built model.
Any thoughts on the above are welcome.
regards
Alan W
Lifting capacity of 3 pt linkage on 440
- AlanW
- 40C crawler
- Posts: 10
- Joined: Wed Oct 26, 2016 4:03 am
- Location: Adelaide Hills South Australia
Lifting capacity of 3 pt linkage on 440
Owner of 440 John Deere Lanz 1960, with P3 Perkins, 3 Pt Linkage & PTO
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
That would be correct as it is meant to be used with digging implements.
Stan
That would be correct as it is meant to be used with digging implements.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
That seems light on lift capacity, check your system pressure.
Cylinder has more push than pull is why the difference.
Lavoy
Cylinder has more push than pull is why the difference.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
hi
it may be off topic but...
while is was looking what 440 lanz is , ifound this video
https://www.youtube.com/watch?v=Ff_6t11gG7A
incredible..
it may be off topic but...
while is was looking what 440 lanz is , ifound this video
https://www.youtube.com/watch?v=Ff_6t11gG7A
incredible..
-
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
Who is online
Users browsing this forum: No registered users and 70 guests