440 to 1010

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Appleguy
MC crawler
MC crawler
Posts: 1
Joined: Tue Feb 07, 2017 9:59 am

440 to 1010

Post by Appleguy » Tue Feb 07, 2017 12:45 pm

Will a inside hydraulic 6 way dozer frame, off a 440IC work on a 1010 crawler?
I believe the model on the dozer frame is a 64
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10945
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Feb 07, 2017 2:07 pm

I did the opposite of you, and it did work, but there is a difference, the blade will hit the grille. Not sure what that means doing the reverse.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
pop pop
1010 crawler
1010 crawler
Posts: 490
Joined: Thu Aug 27, 2009 12:07 am
Location: chandler, arizona

Post by pop pop » Tue Feb 07, 2017 7:24 pm

i think the 1010 tracks are too close together by about 3/4".
i wrote up an few posts about this last year as i was going to do a 1010 blade to a 440.
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime :cry:
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10945
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Feb 07, 2017 11:47 pm

Would only work with 12" pads, or 10".
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 49 guests