I would appreciate any information, pictures, or dimensions of the JD battery boxes that were bolted to the left fender of a 440 crawler. It was used especially when a 91 or 831 loader was attached due to not being able to access the battery under the hood with the loader in the down position.
There were several boxes used, all about the same, different attaching points for the covers.
Part numbers I came up with for boxes that were used are:
AT 11285 T (used 4 wing nuts on cover)
AT 11494 T (used two nuts and bolts on hold cover)
AT 11808 T (used 4 nuts and bolts on hold cover)
Battery box for a 440 with a loader
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
Battery box for a 440 with a loader
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
Who is online
Users browsing this forum: No registered users and 132 guests