40c track pad fasteners
-
- 440 crawler
- Posts: 223
- Joined: Sun Oct 27, 2013 8:41 am
- Location: Saint John, NB, Canada
40c track pad fasteners
I am going to install my pads on a new-to-me chain using Grade 8 bolts. Should I use lock nuts, hex nuts and lock washers or just hex nuts? Thanks.
have 40c 4 roller crawler, 1927 Ford T Touring car, 1931 Ford A Roadster, 1951 Standard Vanguard Saloon. Never a dull moment!
Re: 40c track pad fasteners
I use grade 5, fine thread, and standard nuts. The grade 5 will stretch a little bit and seems to hold a little better for a little less money, but grade 8 will work too.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 440 crawler
- Posts: 223
- Joined: Sun Oct 27, 2013 8:41 am
- Location: Saint John, NB, Canada
Re: 40c track pad fasteners
Thanks Lavoy
have 40c 4 roller crawler, 1927 Ford T Touring car, 1931 Ford A Roadster, 1951 Standard Vanguard Saloon. Never a dull moment!
Who is online
Users browsing this forum: No registered users and 156 guests