440 icd transmission rebuild/ tools

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
frozendozer
430 crawler
430 crawler
Posts: 80
Joined: Sat May 12, 2007 11:48 pm

440 icd transmission rebuild/ tools

Post by frozendozer » Sun Jul 16, 2017 10:33 am

Hello folks
In the process of rebuilding my transmission on my 440icd. I look at the manual and it refers to a special tool that is used to set the pinion. I looked on line for John Deere tool AT11487T, however I can't find one. Does any one know where I Czn source this tool? Does anyone have a fool proof method to correctly install thd crown and pinion without this tool?

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 440 icd transmission rebuild/ tools

Post by Lavoy » Mon Jul 17, 2017 2:50 pm

Tool is only way to go, fought this for years. If you are really good (I'm not) at differential work, you could probably do it the hard way with Prussian Blue and looking at the patter.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 48 guests