440 crawbar pin

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
peteellis
MC crawler
MC crawler
Posts: 3
Joined: Thu Aug 25, 2016 7:56 pm

440 crawbar pin

Post by peteellis » Thu Oct 26, 2017 6:44 pm

how do I remove front 440 drawbar pin. don;t dare drive wedge between pin and transmission, too much oil to use torch any ideas?? thanks

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 440 crawbar pin

Post by Lavoy » Fri Oct 27, 2017 9:29 am

You can pry some on the trans case, just don't get out of hand. Pry down on the pin while hitting upward with an air hammer is probably the best.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

peteellis
MC crawler
MC crawler
Posts: 3
Joined: Thu Aug 25, 2016 7:56 pm

Re: 440 crawbar pin

Post by peteellis » Fri Oct 27, 2017 7:19 pm

thanks got it with some prying and a little heat

Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests