440 crawbar pin
440 crawbar pin
how do I remove front 440 drawbar pin. don;t dare drive wedge between pin and transmission, too much oil to use torch any ideas?? thanks
Re: 440 crawbar pin
You can pry some on the trans case, just don't get out of hand. Pry down on the pin while hitting upward with an air hammer is probably the best.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: 440 crawbar pin
thanks got it with some prying and a little heat
Who is online
Users browsing this forum: No registered users and 62 guests