Mc grease and grease guns

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Seth
430 crawler
430 crawler
Posts: 51
Joined: Mon Oct 23, 2017 9:32 am

Mc grease and grease guns

Post by Seth » Mon Oct 30, 2017 5:55 pm

I have been reading all the posts about 3 roller grease.. and I want to get it right. I need a low pressure grease gun that fits the button head fittings, and I want to use a thick grease. Correct? Were can I get the grease gun that I need to use? Thanks

User avatar
Lavoy
Site Admin
Site Admin
Posts: 9224
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Mc grease and grease guns

Post by Lavoy » Mon Oct 30, 2017 8:25 pm

Gun is irrelevant on an MC, no seals to blow out. High volume will help, you are probably looking at 3 tubes to grease bottom rollers and front idlers.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Seth
430 crawler
430 crawler
Posts: 51
Joined: Mon Oct 23, 2017 9:32 am

Re: Mc grease and grease guns

Post by Seth » Tue Oct 31, 2017 6:21 am

Thanks, do you guys know what size adapter I need ?

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2327
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: Mc grease and grease guns

Post by Stan Disbrow » Tue Oct 31, 2017 7:03 am

Hi,

I was going to say 5/8", but that is for the later machines with the bellows seals. The earlier ones are larger, but search as I might, I have not seen a size mentioned anywhere. Only that the older ones are larger. So, looking at mine for a make and model will do you no good.

They changed the size because of the seals and the need for a low pressure gun. Both the gun and the adapter came with a new machine back in the day.

Stan
There's No Such Thing As A Cheap Crawler!

Have: '58 JD 420c 5-roller w/62 inside manual blade
Have: '78 JD350C w/6310 outside manual blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Also Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
Lavoy
Site Admin
Site Admin
Posts: 9224
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Mc grease and grease guns

Post by Lavoy » Tue Oct 31, 2017 8:41 am

I have them on hand, but should be 5/8".
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests