JD 440 ICD oil filter

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
mitchb
MC crawler
MC crawler
Posts: 6
Joined: Fri Nov 17, 2017 1:55 pm

JD 440 ICD oil filter

Post by mitchb » Fri Nov 24, 2017 5:27 pm

I can not find the oil filter on this machine. Other posts say it is on the left of motor under tank and behind governor. Is it possible it was removed? I don't see any lines blocked off / missing. Anyone have a picture?

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Re: JD 440 ICD oil filter

Post by shinnery » Fri Nov 24, 2017 7:42 pm

Look st this video, in the first half of the video you can see a large plate with about a 3 inch hole in it between the hood and the track. My oil filter is mounted just inside that plate, horizontally. It is a bypass style filter and the lines run down in front of and below the governor.
https://www.youtube.com/watch?v=U2n2_ZxIr3s
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

mitchb
MC crawler
MC crawler
Posts: 6
Joined: Fri Nov 17, 2017 1:55 pm

Re: JD 440 ICD oil filter

Post by mitchb » Mon Nov 27, 2017 7:18 pm

Thanks, I looked at the video and found some pictures. The filter is definitely gone. Does anyone have a close up photo of where the oil lines connect into the block? I'm going to put a spin on filter on it if I can find a kit.

User avatar
arto_wa
MC crawler
MC crawler
Posts: 9
Joined: Mon Apr 25, 2016 10:22 am
Location: S.W. Washington State

Re: JD 440 ICD oil filter

Post by arto_wa » Mon Jan 22, 2018 8:59 am

The filter is located in a horizontal fairly large round steel canister on the left side of engine.
Napa Gold 1100 (WIX 5110) filters fit what I have.

http://www.wixfilters.com/Lookup/Applic ... ?Section=4

Here is an old photo:

http://imgbox.com/p9IKPvuh

8)
1959 440 ICD with 6-way hydraulic blade.

frozendozer
430 crawler
430 crawler
Posts: 80
Joined: Sat May 12, 2007 11:48 pm

Re: JD 440 ICD oil filter

Post by frozendozer » Sat Feb 03, 2018 1:42 pm

I had trouble finding a filter on my location . I we to hhe local hot rod shop and purchased a remote filter kit that uses ford filter

User avatar
arto_wa
MC crawler
MC crawler
Posts: 9
Joined: Mon Apr 25, 2016 10:22 am
Location: S.W. Washington State

Re: JD 440 ICD oil filter

Post by arto_wa » Sun Feb 04, 2018 11:09 am

I hope that works well for you.

The original is a fairly large filter with OD 4.1" and 5" height.

As far as I know, the same filter was also used in many Cadillac models (51-58) and other GM Cars/Trucks (50-62) from the same era.
1959 440 ICD with 6-way hydraulic blade.

Post Reply

Who is online

Users browsing this forum: yukonjack and 39 guests