General help and support for your Lindeman through 2010 John Deere crawler
-
ironyetty
- 430 crawler
- Posts: 89
- Joined: Fri Aug 04, 2006 5:40 pm
- Location: Fort Ashby, WV 26719
Post
by ironyetty » Wed Oct 25, 2006 2:37 pm
I just bought a new head for my 2010 crawler and the outfit I bought it from already had put new seals and everything for the combustion chamber together. However the chamber setup is the later model 2010 chambers, the one I took off was the earlier of the two. Will the injector lines fit the new chamber setup? I know the injector assembly is different but can't tell from the manual if the hook up is the same?
Thanks in advance
Cliff
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Oct 25, 2006 3:05 pm
I believe they are different, but wounldn't swear to it.
Lavoy
-
jdman
- 430 crawler
- Posts: 54
- Joined: Tue Apr 05, 2005 1:09 pm
- Location: Chesaning, Michigan
Post
by jdman » Fri Oct 27, 2006 9:15 am
Yes, There Different....... 10001-42000 Is A Two Piece Line.... Cyl #1 Part # at13730t #2 at13729t #3 at13732t #4 at13731t Then You Need 4 # t11291t 42001 - up Is One Piece.. #1 at17170t #2 at17171t #3 at17172t #4 at17173t.....
Jeff
Who is online
Users browsing this forum: No registered users and 155 guests
