40c track

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Mark Birdeau
420 crawler
420 crawler
Posts: 43
Joined: Fri Feb 29, 2008 3:36 pm
Location: Catawba, Wi.

40c track

Post by Mark Birdeau » Thu Jan 25, 2018 1:12 pm

Are the pins and bushings available for a 40c? (I see in a older post that the 420's are and the approximate cost)Also is there any way a pin good be driven by one's self? I know all mine are getting bad but I have 1 bushing completely gone and looking for a temporary fix.

Mark:
Mark Birdeau:

B Town
350 crawler
350 crawler
Posts: 752
Joined: Fri Dec 11, 2015 7:04 pm
Location: Western Iowa

Re: 40c track

Post by B Town » Thu Jan 25, 2018 1:52 pm

Send Lavoy an email or PM. He has had them in the past.

A track frame is your only option for the pins and bushing R&R.

Take care, Bruce

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: 40c track

Post by Stan Disbrow » Thu Jan 25, 2018 2:49 pm

Hi,

These things are pressed into place, tightly. So, you need a lot of force to work on them. A track press is really the only option.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 40c track

Post by Lavoy » Fri Jan 26, 2018 9:51 am

Available yes, can you do it no. No offense, but been there tried that, failed, and now own a track press.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Mark Birdeau
420 crawler
420 crawler
Posts: 43
Joined: Fri Feb 29, 2008 3:36 pm
Location: Catawba, Wi.

Re: 40c track

Post by Mark Birdeau » Fri Jan 26, 2018 12:30 pm

Thanks everyone!
No offense, but been there tried that, failed, and now own a track press.
That's what I thought Lavoy, but I figured I'd ask just in case.

Mark:
Mark Birdeau:

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 40c track

Post by Lavoy » Fri Jan 26, 2018 3:05 pm

No problem.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: B Town and 50 guests