1010 loader reverser

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Keith-OR
430 crawler
430 crawler
Posts: 64
Joined: Fri Sep 22, 2017 9:35 pm
Location: Hermiston, Oregon

1010 loader reverser

Post by Keith-OR » Mon Mar 05, 2018 10:03 pm

Need some info 1010 crawler loader. The cooler for the reverser is missing, is this a high pressure cooler, or will a automotive trans cooler work. what is the working presssure for the reverser.

Thanks
Keith
Keith

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 1010 loader reverser

Post by Lavoy » Tue Mar 06, 2018 8:34 am

Early crawlers were an air to oil cooler on the front of the radiator, later were oil to water in the radiator.
About 135 PSI is system pressure, so automotive cooler will work. There are some better quality hyd coolers out there with threaded fitting that may be easier to adapt to.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Keith-OR
430 crawler
430 crawler
Posts: 64
Joined: Fri Sep 22, 2017 9:35 pm
Location: Hermiston, Oregon

Re: 1010 loader reverser

Post by Keith-OR » Wed Mar 07, 2018 1:12 am

Was curios on the trans cooler, there is a trans cooler attached to the radiator, but reverser lines are not hooked to it. I will look for another cooler with fittings.
Thanks Lavoy for the info
Keith

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 1010 loader reverser

Post by Lavoy » Wed Mar 07, 2018 8:44 am

Someone must have disconnected it in the past.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: jimmydiesel and 45 guests