Model 61 Blade bushings needed

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
gschrader
40C crawler
40C crawler
Posts: 10
Joined: Sun Feb 19, 2017 5:59 pm
Location: New York

Model 61 Blade bushings needed

Post by gschrader » Sat Apr 28, 2018 6:01 pm

Good Evening, I would like to replace the bushings on my model 61 blade. I need 2 of each of part numbers Y1780c, Y1781c and Y1782c. These are no longer available from Deere. Is there anyone who makes these or has available? Any help would be greatly appreciated.
Thanks! Gordon

User avatar
gregjo1948
2010 crawler
2010 crawler
Posts: 709
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Re: Model 61 Blade bushings needed

Post by gregjo1948 » Mon Apr 30, 2018 4:20 am

Have you checked with Lavoy?
JD 350B diesel w/rops & 6way blade, Case 580B Loader/backhoe, Farmall 504 highcrop, International 404 utility, International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller

User avatar
Lavoy
Site Admin
Site Admin
Posts: 9326
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Model 61 Blade bushings needed

Post by Lavoy » Mon Apr 30, 2018 10:19 am

I can't find my parts book right now, but if you mean the big bushings around the bolts, yes, I have made them in the past.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests