My gearmatic rebuild

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Mtbxdrew
MC crawler
MC crawler
Posts: 9
Joined: Sun Sep 24, 2017 4:31 am

My gearmatic rebuild

Post by Mtbxdrew » Thu Jun 07, 2018 7:13 pm

Figured I’d share my rebuild, drum bearings are 6211zznr side cover bearing is a 6210-2rs, I relined the bands myself, everywhere I called wanted a small fortune to reline them, I was lucky that my master control unit was not seized, the slave for the clutch was blown apart, I took the plunger to a local parts store and they gave me the seal closest to what I needed, put 65ft of 5/8s cable on and 4 chokers, pulls very well, can’t seem to post pics

dtoots1
350 crawler
350 crawler
Posts: 1162
Joined: Fri Nov 30, 2012 8:54 am
Location: akron, ohio

Re: My gearmatic rebuild

Post by dtoots1 » Fri Jun 08, 2018 7:13 am

cannot post pics from phone...use pc laptop etc

Mtbxdrew
MC crawler
MC crawler
Posts: 9
Joined: Sun Sep 24, 2017 4:31 am

Re: My gearmatic rebuild

Post by Mtbxdrew » Fri Jun 08, 2018 9:59 am

Don’t have one

dtoots1
350 crawler
350 crawler
Posts: 1162
Joined: Fri Nov 30, 2012 8:54 am
Location: akron, ohio

Re: My gearmatic rebuild

Post by dtoots1 » Sat Jun 09, 2018 5:13 am

got e mail? send to someones pc that could upload for you

Mtbxdrew
MC crawler
MC crawler
Posts: 9
Joined: Sun Sep 24, 2017 4:31 am

Re: My gearmatic rebuild

Post by Mtbxdrew » Sat Jun 16, 2018 7:18 am

returned to the stone age and must be a MAC issue, cant post pictures off the MAC either, i can email them to someone on the board if anyone cares to see them if not delete the post. thanks

dtoots1
350 crawler
350 crawler
Posts: 1162
Joined: Fri Nov 30, 2012 8:54 am
Location: akron, ohio

Re: My gearmatic rebuild

Post by dtoots1 » Sat Jun 16, 2018 7:41 pm

send em to me....email address is in profile

Post Reply

Who is online

Users browsing this forum: No registered users and 63 guests